delete

Setting Up a Multiple-Monitor Workstation

 Since technology is advancing, businesses take advantage of these advances to improve their productivity. A multi-monitor workstation makes it easy for the employees to improve their work every day. Although you might think that it’s too expensive, it’s cost worthy if you consider a lot of things before deploying such. In this article, we tell you the things to consider when setting such workstation. You can also call small business IT support Columbus for more information.  

1. Configuration 

Setting up a multi-monitor workstation involves choosing between the laptops and desktops. Both of them require different configurations, and it will affect the ease of installation. Adding monitors on a desktop is easy. It involves installing graphic adapters to increase the outputs of video. There are desktops that have two video outputs that can simultaneously work on two separate monitors. Laptops are more popular than desktop computers since it come with a built-in VGA output. Remember that adding extra monitors increases the complexity.  

2. Power Consumption 

Not everyone pay attention to power consumption, since there are many desktop computers and laptops that are energy-efficient. Most of these also come with ultra-low powered processers that consume too much power. But adding extra monitors mean that the power consumption is high, and you will obviously see it on your utility bill.  

The good news is that modern LCD monitors significantly use less energy than the old ones but it still consumes power. Good news is that you can limit the power consumption. You can save electricity by setting the monitor into a standby mode when the desktop is inactive.  

3. Size and Models 

Other things to consider are the size of the monitor and their models. Because of phasing out older display models, it might not be possible for you to acquire the same monitor models for every user. So it will turn out that you will have different-sized monitors in different workstations. There will also be a limitation to how many monitors you can deploy. Things to consider are the graphics card, display resolution and the processing capabilities of CPU.  

4. Monitor Specifications 

When you choose the monitor, you should consider the specifications carefully. It might be a no-brainer but you should still consider some factors. Monitors that have IPS technology are the best because of its viewing angles. Monitors with lesser panels offer small viewing angles that result to less flexibility. Another factor that sometimes overlooked is the type of input ports. The DisplayPort is making everything better compare to the VGA input. High-end monitors offer support multiple input ports for HDMI, VGA, DisplayPort and DVI.  

5. Space Constraints 

Setting up multiple-monitor at a workstation will take up much space even though there are monitors that are small. A medium-sized desk can accommodate two 27-inch or 24-inch displays. The remaining space could be used for other peripherals like mouse and keyboard. You can also increase the space in the workstation by having monitor arms.  

The arms are attached to the monitor’s back and allow you to clip the screen to the desk’s edges. Using this will allow you to reclaim inches of more space, creating more room for other stuff.  

delete

Smart Things to do When You Return to Your Flooded Home 

One of the most unfortunate events that could happen to our neighborhood is flooding. Good thing if your place is safe from natural disasters such as hurricanes, but for people that live in places that receive these storms once or twice a year, flooding is such a hassle and problem. 

If you are one of these people who receive occasional storms and flooding, you need not worry too much about it because you simply can’t do anything about it. Instead of worrying, it is better to prepare yourself so you can act appropriately when it comes. To help you, here are the smart things to do when you return to your flooded home. 

 Flooded Home

Check for broken Electrical lines

When your home is flooded, you should not be overconfident and just enter the house without precaution. You have to stand back a distance away and then check and inspect the surroundings. The first thing to look for is the utility lines or your electrical lines; chance is that these wires are still live and could electrocute you if you come in contact.  

Do not proceed and call for help from professional electricians to clear the area. You can also call your electrical company and make them cut off the electrical supply until your place is cleared.  

Check for Gas Leaks

Next thing to worry about is gas leaking, do not in any way light a fire when you are about to enter your flooded house. If the place is dark, do not be tempted to use your lighter, instead use a flashlight. One way to determine if there is gas leaking is by smelling the atmosphere. If you detect the presence of gas in the air, find your gas meter and shut off the valve. 

Inspect the Walls from the Outside

Another thing to be cautious of is the walls of your house. Flooding makes the walls weak because water in huge amounts exerts so much pressure on its foundations that it can cause its crumble. To check for this weakness, walk around your house and inspect if there are large cracks in it. When there is none, walk from a distance and try to see if the house is still standing straight and not leaning. If the walls are cracked or if the whole house is leaning, do not enter because it can crumble anytime.  

Wear Appropriate Clothing

A flooded house can be dangerous especially if you are careless or unprepared when you enter it. To make yourself safe, you better way appropriate clothing to protect your skin from cuts from broken glasses and appliances.  

You may have the urge to clean your house immediately, but you have to be careful. Wait until all the water has gone and dried out and then begin the process. If, however, you don’t have the energy to do all the cleaning, you can call excellent professionals to handle and restore the condition your house. For a good one, contact domesticenvironmentalservices.com 

delete

Tips on How to Locate the Cause of Leaking Roof 

For homeowners, roof leaks present multiple challenges. They can lead to significant damage to the interior portion of your home and will never occur in a time which is convenient. Long after the repair has been made in the form of mold growth on the interior surfaces of your home; their effects can still linger for quite a time.

Leaking Roof

Sometimes, determining the source of the leakage can be quite challenging because the source of the leakage on the outside of your home does not often match where the leak appears inside your home. For homeowners who are attempting to repair the leak, this leads to a good deal of frustration. 

It is not an act of exact science locating the source of the roof leak. Due to the fact that leaking roof may have several contributing factors and may not be always the direct result of one specific problem pertaining to the roof, it is basically a process of elimination. 

It is advisable that you see the leak as it occurs in order to trace the leak back to where it came from. Instead of depending on the remnants of the leak such as stains on the ceiling, it helps to visually see the active leak. They may not reveal the entire story behind the leaking roof even though it is true that stains can be used to locate roof leaks. 

It will be necessary to trace the leak during a rain or snow in order to see the leak occurring. if it is summer wherein weather is not on your side, it may be necessary to conduct a water test on the roof surface by saturating the area using a garden hose for a certain period of time until the leaking happens on the inside of the home. 

You can start by locating the leak inside your home. You must be certain that the source of water comes from the roof and not from other sources such as your plumbing system. Measure the location of the leak in the living space from two fixed points once you are certain that the leak is caused by an issue related to your roof. 

Using the measurements taken from the living space in your home, go into your attic and locate the source of the leak on the underside of the roof deck. From two fixed points, measure the location where the water is penetrating the attic space from two fixed points.  

Apply the measurements taken from the attic space to the surface of the roof. You must then find the approximate location where the water is entering your attic. You can start working outward in concentric circles from the location where you determined that the leak is occurring. 

You can choose to make the repair yourself or hire a professional roofing contractor to complete the repair. It is still possible that the roofing contractor will still charge a diagnostic fee if he determines that the cause of the leak is unrelated to the roof on your home. It is advisable to rule out other causes for leaks in order to avoid this charge. 

It is also a good idea to clean your roof especially the gutter because it is sometimes the reason for the deterioration of your roof which can cause leaking. You can clean it by yourself or you can ask assistance from Coventry gutter cleaners to provide professional services.